Please read product description before buy~ return is not allow..
Important: This line card use is required with television (TV) output function , no such function may not use, please be careful. (Usually two shows, one for the monitor and the other head for the TV output, the setting in the Display Properties to see inside job)
With this line, the first to have your computer output to the TV's functions, there is no output to the TV's functions, it can not be used.
Judge for themselves the computer's features:
On the desktop, right click --- Set --- Point Properties --- point on the map to see the display can be 1, 2 two boxes (see picture below). If one can not use this line, please do not photographed. Because computers do not support output to a TV, you need to return, to bear return postage.
VGA to S + AV PC connected to a TV
The line was originally a supporting graphics card G400, NV6 family that supports the VGA signal into an S signal or the AV signal. Other models can also use the card matches the condition that VGA graphics card with TV (TV-OUT) output function, no function can not be used. That is the line itself does not turn, but your card has this feature can. If the card already has an S port, AV cable directly to the S switch output.
Computer setting method illustrated below, because the TV monitor resolution and refresh rate than low, so the resolution of your computer first to the minimum 800X600, refresh transferred to 60. The following figure shows set to 2, following a check mark in the small box, colors minimum, confirm and restart the computer.
Then successfully tried upwards. Of course, you need to set up a TV signal source for the video input, that option when you watch DVD, TV, cable TV signal state is only connected to the closed-circuit
Check the graphics property methods (like for reference):
General "Start - Settings - Control Panel - Display - Settings", as shown above with a TV display options, select the confirmation VGA video signal to be converted into a TV signal, you can display on the TV.
The wire which require special supporting graphics (G400, NV6 series above, etc.) to support the VGA signal into an S signal or the AV signal to be used for this line card with a television (TV) output function, no function can not be used, generally for dual display , the main display for the display and vice remarkable for the TV. Since this line is separated from the female terminal ends, so you need an S or with the right AV cable in order to connect to a TV device.
Last Updated @ 11/19/2014 6:52:11 AM
|Country of Origin||N/A|
|Shipping Method||Courier Service|
|GST Applicable||Not Applicable (Non-GST seller)|
|After Sale Service||Refer to product description|